CANBUS SAE J1939 BEK-PLUS

SUITABLE FOR TELECOM AMF ANTENNA STATION DIESEL GENERATOR CONTROL PANELS 3-Phase AMF ATS RS485  RS23 REMOTE CONTROL MONITORING

The Be2K-PLUS controller is a combined 3-phase AMF &  Generator Control System. The parameters, the alarms and operating functions are indicated by means of a high-performance 128X64 Organic Display capable of operating in between -30°C and +70°C. The front fascia features super-bright solid state indicators able to provide a view about the status of the controller in all climatic conditions. Be2K-PLUS interfaces with resistive-sensors, 4-20 mA /0-10 Transmitters and a magnetic Pick-up (or 'W'). Measurements including Vac, Aac, Vdc, kVA, kVar, kW, Energy, Pf, Hz, hour count, R.p.m., Oil Pressure, Engine Temperature,  3 Auxiliary Temperatures , Telecom Battery Vdc , Battery Vdc (Engine) and Fuel Level.  The Be2K-PLUS is SAE-J1939 compatible and provides RS485 and RS232 interfaces.

CANBUS SAE J1939 BEK3

IF YOUR BUSINESS IS MAKING INDUSTRIAL AMF ATS CONTROL PANELS USE BEK3

 

The BeK3 is a 3-phase Automatic Mains Failure including a generator controller. It connects, via CANBUS, to engines with ECU (SAE-J1939) but it works also with standard engines if analog sensors or digital sensors are available.   All parameters are indicated by means of a 128X64 graphic display capable of operating in a temperature range between -25°C and +70°C.  Measurements including Vac, Aac, Vdc, kVA, kVar, kW, Energy, Pf, Hz, hour count, R.p.m., Oil Pressure, Engine Temperature, Battery Vdc (Engine) and Fuel Level. A monitoring and control software program is provided free of charge. The BeK3 provides MODBUS via RS485 and complies with NFPA-110 / NFPA-99 specifications. The optional module TCP-IP Server will allow you TCP-IP connection to INTERNET via a ROUTER. By using the Be16 module you can control the AMF Controller BEK3 from a remote location by using short messages (SMS) via GSM modem.

CANBUS SAE J1939

3-Phase AMF+ATS+RS485 MODBUS RTU

The Be124 is a 3-Phase Generating Set & Engine controller that integrates a Data logger, an Oscilloscope and a Transient recorder. The Be124 provides visual indication by means of LEDs and graphic display for all parameters and alarms. The Be124 features programmable settings and complies with NFPA110 CAN/CSA-C282-M89 regulations. It features RS485 and isolated Can bus (SAE-J1939). The figure illustrates the layout of the front panel. If Can bus is not available, the Be124 can interface with analog sensors and configurable switches for Oil Pressure, Temperature & Fuel Level monitoring.

LOW BATTERY AUTOSTART & REMOTABLE AUTOSTART >>

INTERNET GENERATOR CONTROL MONITORING >>

REAL TIME OSCILLOSCOPE & DATA LOGGER >>

STUNNING WIRING DIAGRAM SIMPLICITY >>

GENERATOR AUTO START TUTORIAL >>

 

Leave a Reply