Fire Pump Controller Password

FIRE PUMP CONTROLLER USER PASSWORD

Display

Instructions for USER password

 

 

PASSWORD

 

CLEAR PASSWORD

 

 

 NEW PASSWORD

 

BACK     * * * *     OK

[←]                    [→]

 

 

  CLEAR PASSWORD

[←] YES      NO [→]                  

 

The display will present the option [PASSWORD] (to insert a new password) and [CLEAR PASSWORD] (to cancel a previous password).

Use [ ↑ ] or [ ↓ ] to select a function and push [→] to enter the function.

 

Insert a password

a) Push [→] to choose the first digit on the left.

b) Push [ ↑ ] and [ ↓ ] to choose a number in between 1 to 9.

c) Push [→] to move right to the second digit from the left.

d) Repeat step b) and step c) until you program the all 4 digits.

d) Push [→] to confirm the password.

e) By now on, programming will be password protected. Note that using the OEM password you are not authorized to access the USER parameters (and vice versa).

 

Remove (clear) a password

a) To clear a password you are required to type the password first.

b) The display indicates the available options: EXIT ([←]) or CLEAR ([ACK])

c) The display will indicate the message [CLEAR PASSWORD DONE].

d) From now on, you will no longer need a password to program the Be126.

 

(*)Note: the password ‘0000’ is not allowed

 

FIRE PUMP CONTROLLER OEM PASSWORD

To access this menu, push [OFF] to enter the OFF MODE of operation. Push [MENU] to open the main menu list. Repeatedly push [ ↓ ] to select [oem password]. Push [→] to enter the Menu.

 

Display

Instructions for OEM password

 

 

PASSWORD

 

CLEAR PASSWORD

 

 

 NEW PASSWORD

 

BACK     * * * *     OK

[←]                    [→]

 

 

  CLEAR PASSWORD

[←] YES      NO [→]                 

 

The display will present the option [PASSWORD] (to insert a new password) and [CLEAR PASSWORD] (to cancel a previous password).

Use [ ↑ ] or [ ↓ ] to select a function and push [→] to enter the function.

 

Insert a password

a) Push [→] to choose the first digit on the left.

b) Push [ ↑ ] and [ ↓ ] to choose a number in between 1 to 9.

c) Push [→] to move right to the second digit from the left.

d) Repeat step b) and step c) until you program the all 4 digits.

d) Push [→] to confirm the password.

e) By now on, programming will be password protected. Note that using the OEM password you are not authorized to access the USER parameters (and vice versa).

 

Remove (clear) a password

a) To clear a password you are required to type the password first.

b) The display indicates the available options: EXIT ([←]) or CLEAR ([ACK])

c) The display will indicate the message [CLEAR PASSWORD DONE].

d) From now on, you will no longer need a password to program the Be126.

 

(*) Note: the password ‘0000’ is not allowed