How to set up the automation of a generator

First of all what does the OEM term mean. You can clarify the matter by using this link.

Bernini Design BE124 provides a set of Generator Controller OEM parameters. Once programmed, we recommend that you ‘seal’ the programming by inserting a password. In case you loose the password, Bernini Design is able to provide proper information in a way that you can unlock the system. Generator Controller OEM parameters are grouped in logical groups and arranged in a MENU. The video on the right side explain all details. There you are the basic instructions:

>Push the [ACK] push button and then, push the [←] pushbutton; the Main Menu appears on display.

>Push [ ↓ ] to browse the list and push [→] to enter the function you need or repeatedly push [ ↑ ] to proceed to the top of the Main Menu.

>Use  the [ ↑ ] or [ ↓ ] arrow to select [OEM PARAMETERS] from the Main Menu.

>Push the [→] arrow to enter the menu.

Genset Controller OEM Parameters

 

OEM PARAMETERS LIST

Use [ ↑ ] or [ ↓ ] to select this menu from the [OEM PARAMETERS] (see above). Push the [→] arrow to enter the menu. To find out more details, consult the section of the OEM manual indicated in the following table. Some links are also provided.

 

 

 

 

 

 

OEM PARAMETERS

See:

 

 

 

 

 

OEM PARAMETERS

see:

 

 

 

 

 

   OEM PARAMETERS

see:

 

GENERATOR PARAM.                  

ENGINE PARAM.

SPEED PARAMETERS

FUEL PARAMETERS

 

11.3

11.4

11.5

11.6

 

HOURS-HORN   

INPUTS PARAM.

OUTPUTS PARAM.

T SENSOR

 

11.7

11.8

11.9

11.10

 

FUEL SENSOR                  

PRESSURE SENSOR

RESTORE DEFAULTS

 

 

11.10

11.10

11.11