generator key start circuit

Generator key start circuit using Be24

When you do not require the auto start function, you can directly start the engine by using the key switch. Rated current is about 30Amps. You can use 12V or 24V battery. The Be24 controller works up to 36VDC. You are required to use cables of appropriate size. We always recommend that you protect the connections by using a fuse. In this case the Be24 will not be able to terminate the crank. Before turn the key to 'START' wait for the lamp self test. After that, the Be24 will turn on the fuel solenoid and you can start the engine at anytime. Do not use the output number '10'. Leave the connection 'open'.



Generator Key Start Circuit