GENERATOR CONTROLLERS MANUFACTURER
THE GENERATOR CONTROLLERS Be2K-PLUS ARE RATED -30°C-+85°C
The generator controllers BE2K-PLUS are based on multiprocessor architecture consequently, the best solution for TELECOM BTS where an operating temperature range from -30°C to 85°C is mandatory.
SOLID ROCK, NO INTERFERENCES, ENCLOSURE MADE OF STEEL
GENERATOR CONTROLLERS LEADERSHIP
There are leaders, and then there's everyone else. At Bernini Design when it is about generator controllers, we take immense pride in driving the generator controllers' standard forward. We focus from 1984, on efficiency, quality, and safety.
No one ever complained about our generator controllers
THE BE124 GSM GENERATOR CONTROL PANEL
First, choose on this page the generator controllers suitable for your application. Second, check our offer. We are sure that our wide range of generator controllers will satisfy your requirements for industrial, commercial and telecom standby generators.
WHAT IS A GENERATOR CONTROLLER?
What's more, choose your language, or stay tuned on this page.
MULTIFUNCTION GENERATOR CONTROLLERS
The BeK3 generator controllers are designed for generator control panel manufacturers. First, thanks to CANbus, and MODbus you can use these generator controllers when you require remote control and monitoring.
Second, the embedded mains monitoring will allow you to manufacture AMF and ATS panels. Lastly, the metal cover offers extraordinary protection from overvoltages.
GENERAL PURPOSE GENERATOR CONTROLLER
BE24 AUTOMATIC GENERATOR START MODULE
Among the generator controllers for general purposes, the Be24 is the best choice. First, it withstands harsh conditions. Consequently is the best solution when it comes to industrial-grade generators.
Finally, by adding two relays you can transform second-hand generators into an automatic generating set.
The Be172 is the smallest engine protection module with a powerful 30-amp key switch start.
Install it in a small generator, compressor, or agricultural machinery.
It provides an automatic stop to prevent major damage to your engine.
THE BE124 HIGH TECH GENERATOR CONTROLLER
This is the top product when it comes to generator controllers. The Be124 design is focused on the supervision of the engine and generator. The Be124 interfaces with J1939-compatible engines.
READ MORE ABOUT BE124 GENERATOR CONTROLLER
It works at 400Hz, consequently, you can use these controllers for generators' ground support units.
GENERATOR REMOTE MONITORING SOLUTIONS
The Bernini Design generator controllers feature the RS485 interface. Furthermore, by supporting the MODBUS-RTU, you benefit from extraordinary possibilities in remote control monitoring. Next, we support you with free of charge software tools. For example, you can make an AMF panel using the BeK£ controller.
BERNINI DESIGN GENERATOR CONTROLLERS FEATURE REMOTE MONITORING
Next, by adding the GSM gateway, you will have full control via SMS. Even more, by adding the TCP-IP server, you can get a connection to the internet.
BATTERY MONITORING SOLUTIONS
If your business is about solar systems, we have the right product for you. The Be48 is a fully USB programmable monitoring relay. It will automatically start the engine when the battery is low.
It will automatically stop the engine when some adjustable conditions are met.
GSM START-STOP MODULE
The B148 relay is designed to start and stop an engine using SMS remotely.
GSM-BASED GENERATOR MONITORING SYSTEM
You will get the best from it when you wire its output to one of our auto-start modules like Be1, Be24, Be124 and all AMF and ATS controllers.
THE COST-EFFECTIVE ATS CONTROLLER
Use the Be242 when you make automatic transfer switch panels. You only need to make a single round hole. Consequently, you will save meters of cable. As a result, you will save money and time.
The Be242 features an interface board capable of connecting diesel, gasoline or gas engines.
BERNINI DESIGN MANUFACTURER OF TOP-QUALITY PRODUCTS
Our standards are high. So high we're in a league of our own, moving our entire industry forward. The Bernini Design Italy and Bernini Design Romania generator controllers manufacturers have become synonymous with the highest quality.
No one ever complained about having their work executed perfectly.
THE BE-1 GENERATOR CONTROLLERS FEATURE LOW-BATTERY AUTOMATIC START
The Be-1 controllers feature RS485 and support the MODBUS-RTU protocol
2 WIRE GENERATOR REMOTE START KIT
. You can connect analogue or digital sensors. can connect a generator up to 600V.
IS INSTALLING AMF PANELS YOUR CORE BUSINESS?
BROWSE OUR AUTOMATIC MAINS FAILURE PANELS
LOOKING FOR COST-EFFECTIVE PANELS?
Our factory, located in Romania can manufacture at competitive price generator control panels suitable for your application.
BROWSE OUR OFFER OF 15-160KVA ATS PANELS
1980-2010 GENERATOR CONTROLLER
We started our business in 1984. Since then over 400.000 generator controllers have been running worldwide. The following generator controllers are available for you on request.
Be23 Be46 GENERATOR CONTROLLER
The Be46 is the recommended replacement for BE23
THE BM80 GENERATOR CONTROLLER
It is about a general-purpose 3-phase automatic mains failure which monitors two wires from the alternator up to 500V. It features a battery charger.
READ MORE OR PURCHASE THE BM80 CONTROLLER
BE21 GENERATOR CONTROLLER
It is about a general-purpose single-phase automatic mains failure first designed in 1990 with the name AMT910, then Be11 in 1998, then Be21 in 2002. There are over 100.000 Be21 working worldwide.
READ MORE OR PURCHASE THE Be21 CONTROLLER
THE BE22 GENERATOR CONTROLLER
This is the big brother of Be21. The Be22 is fully 3-phase first designed in 2003. There are over 50.000 Be22 working worldwide. For new applications, we recommend that you install the Be242 which is fully compatible.
READ MORE OR PURCHASE THE Be22 CONTROLLER
BE42 GENERATOR CONTROLLER
This is the big brother of Be21. The Be42 is fully 3-phase first designed in 2006. There are over 150.000 Be42 working worldwide. For new applications, we recommend that you install the Be242 which is fully compatible with the user interface point of view
READ MORE OR PURCHASE THE Be42 CONTROLLER
BERNINI DESIGN SRL
Industrial Park
46035 OSTIGLIA
ITALY
SUPPORT
+39 335 70 77 148